Nowadays, there are so many products of 10 hp boat motor honda in the market and you are wondering to choose a best one.You have searched for 10 hp boat motor honda in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 10 hp boat motor honda which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
517 reviews analysed
1. Cozyel 3.5HP Heavy Duty Boat Motor 2 Stroke Outboard Motor Boat Engine W/Water Air Cooling System
- Features 360 degree steering rotation for reverse without gear shifting
- Start-In-Gear protection/clutch feature prohibits prop rotation while idling
- Standard CDI ignition system for easy starting and improved performance
- Superior engine water cooling system for improved engine performance
- Durable cast aluminum construction for superior corrosion protection
Overall length: 92CM
Overall width: 36.5cm
Overall height: 22cm
Transom height: 42cm
Full throttle perating range: 4000-5000r/min
Maximum output: 2.5kw(3.5HP)
Speed: 20km/h(four people)
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark: 7-1/45-A(inch)
The engine and the propeller ratio: 2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 30:1
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
How to start the engine
(1) Plug the emergency turn-off cable plate in the switch groove.
(2) Plug the oil inlet plug for transferring fuel in the Fuel tank socket.
(3) Plug the oil outlet plug in the tubing socket of motor’s bottom.
(4) Spin and loose the venting screw in the fuel tank cap in a counter clockwise direction.
(5) Extrude the pump a few times until the area is full with fuel and the pump goes hard.
(6) Pull shift handle to neutral position.
(7) Turn throttle handle to “start” .
(8) When the engine cooled,puII out the choke valve to increase the concentration of combustible mixture gas and be more convenient and easier to start.
(9) PuII the starting handle, untiI the initiator of the claw and the flywheel plate mesh.
(10) After the engine runs,idle operate it for 2 to 3 minutes to warm up,then pull all the choke valve to the initial position.
(11) After the engine runs, check cooled water stablely flows or not. If there’s no water or stable flowing, turn off the engine and seek for the reason.
(12) During running, hang up the turn-off rope in your wrist or belt to ensure sailing safety.
2. Coleman Powersports 2.6 hp Outboard Motor with Short Shaft, Black
- Lightweight (37.5lb), quiet, 4-stroke motor, 31 gallon internal gas Tank
- Easy start tci ignition
- F-n/360 degree steering
- 1 cylinder OHV engine
- CE & epa Approval
- Quiet efficient 4 stroke motor
- Engineered for lightweight, quiet, reliable operation, the Coleman Four Stroke Outboard Motor is great for small boats, inflatable boats or used as an auxiliary trolling motor.
- Gear Position: Forward/Neutral
- Max Fuel Consumption: .53 (gal/hr)
- Fuel Tank: 1.2L
Coleman Outboard motors are lightweight and very reliable. The 2.6HP four-stroke OHV motor runs quieter and meets EPA and CE standards. It is equipped with a TCI ignition for easy starting along with fan shifting with 360 degree steering. Additional features include: adjustable steering friction, shallow-water drive, vibration reduction, twist grip throttle, and marine aluminum alloy for corrosion protection. Motor Size : 72cc; 4 stroke; water cooled
3. SEA DOG WATER SPORTS Outboard Motor 2 Stroke Inflatable Fishing Boat Engine … (6 HP)
- Durable—-Economical and compact structure. Durable and lightweight ,Perfect match inflatable boats, fishing boats, sailboats, and small yachts.
- 360¡ã Steering Rotation—-Features a 360¡ã steering rotation, enabling you to reverse without changing gear.
- construction. Maneuverable and safe twist grip throttle control.
- Suitable for: Freshwater and saltwater
- year warranty covers the motor, to provide parts free
1. Engine type:single cylinder,2Stroke,6.0HP,water-cooled.
3. Max. output:4.4KW.
7.Control system:Tiller control.
8. Start system:Manual start.
9. Fuel tank copacity:2.5L.
10.Have the external port of fuel tank .
11.Recommended fuel:#92 Lead-free gasoline.
13.Recommended propeller range(in):3-7.8＂×8＂
14.Engine oil:Two stroke engine oil.
16. Carton Size(L×W×H):44in×15in×24.4in.
Two stroke water cooling external engine ： please read the instruction before use. please precisely follow instruction use appropriate TOW STROKE engine oil. The engine MUST be under the warter before start it. Shaft length is 26 in，If the boat tailboard height less than 17.3 in, you can use
4. TeBaisea Outboard Motor Cover – Full Outboard Motor Engine Cover Waterproof Boat Cover with 600D Heavy Duty Oxford Fabric + Extra PVC Coating Fit for Motors
- 【EXCELLENT WATERPROOF PERFORMANCE】Our outboard boat motor covers are made of marine grade 600D heavy duty oxford fabric +PVC coating completely protect your outboard motor against sun, rain, snow and dirt year round. waterproof, dust proof, anti-wind and anti-cold Reinforced seams and waterproof strips at all seams on the back for maximum water resistance to withstand any storms and winds
- 【CUSTOM BOAT MOTOR COVERS FOR MOTOR】Perfect Wind-Resistant boat engine cover ,the drawstring hem results in a tight and custom fit to your outboard engine, together with a zippered access for more firmly hold, protect your outboard engine with exceptional security on the windiest and rainy days
- HIGH SENSITIVIT REFLECTIVE PERFORMANCE 】Outboard engine covers own an extra UV resistant coating, Which prevents your outboard motor from sunlight aging and fading. Block ultraviolet ray,to some extent, protect the color of motor does not fadeOffers best protection for your marine engine in the gulf or onshore
- 【EXTRA PROTECTION】Marine-grade high density polyester full outboard cover, effectively block tiny dust into the interior of motor, also effectively protects your outboard engine from tree sap, bird poop, offers excellent weather protection all year around
- 【2 YEAR WARRANTY】Two year factory limited warranty
5. SEA DOG WATER SPORTS Outboard Motor 2 Stroke Inflatable Fishing Boat Engine(18 HP)
Model: 2-stroke 18P
gear ratio: 2.08(27:13)
Control System:Tiller control
Starting System:Manual start
Control System:#93 gasoline
N.W./G.W.(lb)：80.6 lb/104.7 lb
Bore×Stroke(in):2.2 in×1.97 in
Recommended Propeller range(in):3-9 ¼ “x 8 ”
Recommended Lubricant : Two Stroke Lubricating oil
Mixing ratio:( Fuel:Oil=50:1)
Trim and tilt system : Manual tilt
Standard fuel tank capacity : 24L
6. Seamander Outboard Motor Cover 10-200 HP Engines Cover Waterproof Boat Cover
- Waterproof Oxford fabric, breathable and durable.
- Drawstring closure on bottom hem cinch the cover tightly to the motor.
- Cover motor cowling and motor to protect against sun and weather damage.
- Perfect for boats that require separate outboard motor protection.
- 4 different sizes are available, Fits Up to 10 HP,Fits 20 to 40 HP,Fits 50 to 100 HP Fits 110 to 200 HP
These strong motor covers are made of Marine Grade Polyester .Seamander Motor Covers by Wake offers all purpose, easy slip-on motor covers that will keep your outboard motor looking great and protected against harmful environmental conditions. Keep your new outboard motor looking good and protect it against harmful environmental conditions. Our motor covers have been redesigned to better fit all makes of outboard engines. Simply measure your outboard motor and determine those dimensions that most closely match your particular model.
7. Wingogo 334-65021-0 Water Pump Impeller for Nissan Tohatsu Outboards 9.9HP-15HP-18HP-20HP Boat Motor Parts Replacement Honda Outboards 7.5-10-75-100 HP 19210-935-003 19210-935-A01
- This Water Pump Impeller fits Nissan Tohatsu Outboard Motor OEM P/N 334-65021-0 334650210M Sierra 18-8921. Check your Boat Motor Part Number before Purchase. Please Message us if you are not sure.
- Water Pump Impeller Dimensions : Shaft Size: 0.550 inch, OD: 1.622 inch, Thickness: 0.937 inch, Blades 8. Neoprene Water Pump Impeller Plastic Hub as Pictures Showed, Please see the pictures.
- Water Pump Impeller Replacement for 8HP-9.9HP-10HP-15HP-18HP-20HP Nissan,Tohatsu Mercury & Mariner Boat Motors Engine Cooling System. More Detailed Information Please See Description Below.
- Compatible with the outboards boat motor Mercury Quicksilver Marine 47-803748/Evinrude Johnson OMC BRP 5040046, Cross Part Number reference: 334-65021-0 334650210M 334650210. This Impeller Makes Repair and Maintenance of Water Pumps Easy.
- To ensure this Impeller is suitable for your boat motor, It is VERY IMPORTANT to check your outboard Model or S/N before purchase. You can leave us message e.g. your Boat Engine Model, Serial Number, Horsepower or Year if you are not comfirmed this Water Pump Impeller fits Your Outboard Boat Motor or not. We’re pleasure to help you.
Water Pump Impeller for Nissan Tohatsu Outboards 9.9HP-15HP-18HP-20HP Boat Motor Engine Parts Replacement Honda Outboards 7.5-10-75-100 HP 19210-935-003 19210-935-A01.
Cross Reference: 334-65021-0 334650210M 334650210.
It replaces Sierra Marine Outboards P/N: 18-8921.
Material: Neoprene and Plastic
Number of Blades: 8
Shaft Diameter: 0.550 inch
Overall Diameter: 1.622 inch
Impeller Height: 0.937 inch
Net Weight : 20 g
Fit the following 2,4 stroke Nissan Tohatsu Outboard Engine:
4 stroke : F18B2 F15B2 F9.9B2 F20C F15C F9.9C MFS9.9C MFS15C MFS20C
2 stroke : 18E2 15D2 9.9D, M9.9D2 M15D2 M18E2 M16A2 M20A2 M25A2
9.9 (All), 15 (All), 18 (All), 9.9 4-Stroke (All B Models), 15 4-Stroke (All B Models), 18 4-Stroke(All)
Fits Honda Outboard Motors engine by year and model:
Water Pump Impeller P/N Hub with key drive 19210-935-003 19210-935-A01 Replaces Sierra 18-8921
7.5HP Pre 1997 BF75, BF75Z, B75K1,B75K2,B75K3,
10HP Pre 1997 BF100 BF100Z
75HP 2007 & Later BF75Z
100HP 2007& Later BF100Z
1pc x Water Pump Impeller
It is VERY IMPORTANT to Check your Outboard Engine Model, Horsepower or Year before Purchase. If you have any questions please do not hesitate to ask.
8. FLYMEI Motor Cover, Full Outboard Engine Cover, Waterproof Boat Motor Cover
- NOTE: Please go by the ” Length ” of your motor, DON’T go by the Hp size. If your motor is special, exchanging for next size up.
- 【DURABLE MATERIAL】420D Oxford cloth + PVC coating, 100% waterproof. This outboard motor cover can prevent the motor from fading and squeaking in sunlight, rain, wind, UV rays, extend your motor service life.
- 【SIZE】Good choice for full outboard engine 6-15 HP. NOTE: if your machine motor size is special, please choose the larger size.
- 【EASY TO INSTALL】This outboard motor cover designed with drawstring and zip fastener,easy to install or remove it without tools, excellent for off-season storage or as a quick cover. Coming with a polyester bag for convenient storage.
- 【CONSIDERATE GIFT】Perfect for friends or family members who love boats or sailing.
Product Name: Boat Motor Cover
Material: 420D oxford fabric
Fit for 6-15 HP: Circumference 55.1” Hight 43.3”
Fit for 15-20 HP: Circumference 59” Hight 49”
Fit for 20-30 HP: Circumference 65” Hight 53.9”
Fit for 30-60 HP: Circumference 70.9” Hight 56.7”
Fit for 60-100 HP: Circumference 78.7”Hight 66.9”
Fit for 100-150 HP: Circumference 89” Hight 77.6”
Fit for 175-225 HP: Circumference 92.9” Hight 76.8”
★ Waterproof and UV resistant Outboard Engine Cover, preventing from sunlight aging and fading.
★ Strong motor cover with durable material that never shrink or stretch, protect your marine engine from rain, snow, sun and tiny dust.
★ Double stitched seam, perfect fit your motor.
★ Convenient drawstring and zip fastener design, easy to put on and remove.
★ Full outboard motor cover is a perfect gift for Christmas, Thanksgiving Day or Father’s Day.
-180-Day Money Back Guarantee
-12-Month Replacement Warranty
-7/24 Online Customer Service
-Lifetime Support Guarantee.
9. Mophorn Boat Throttle Control 24800-ZZ5-A22 Boat Control Box Side Mount Outboard Remote Control with Safety Lanyard and Key Switch fit for Honda Outboard Engine
- 【SMOOTH FORWARD & REVERSE OPERATION】- Exceptionally smooth operation is delivered, To shift into forward and reverse, rotate the control lever downward, further rotated downward, the throttle opens.
- 【EMERGENCY LANYARD & KEY SWITCH】- The cord can secure the operation by being attached to operator’s clothing, or arm, or leg. Should operators fall down or leave the helm, the cord will pull out the clip, stopping ignition.
- 【THUMB-OPERATED TRIM/TILT SWITCH】- The power trim and tilt switch is attached to the control lever grip and twin cover. Pushing it UP trims up and tilts up the engine and vice versa.
- 【EXTERNALLY-ADJUSTABLE THROTTLE FRICTION】- By turning in or out the throttle friction screw of the remote control box, the stiffness of the control lever can be adjusted.
- 【FOR BOTH SHIFT AND THROTTLE】- The remote control box is so designed that both shift and throttle can be actuated by operating a remote control lever. So it is convenient for you for sure.
By our suggestions above, we hope that you can found 10 Hp Boat Motor Honda for you.Please don’t forget to share your experience by comment in this post. Thank you!