Top 10 Adjustable Heating Pad Fermenter

MADE FOR KOMBUCHA BREWERS BY KOMBUCHA BREWERS

I’ve been brewing kombucha for many years. After many frustrating attempts to find the perfect kombucha heating wrap I’ve decided to create one myself. I focused on three main things – temperature settings, usability, and durability.

3 Temperature Settings

The temperature of your brew is one of the most important factors in producing yummy kombucha. Yeast loves the heat. That’s why you need to keep your brewing vessel at the right temperatures throughout the brewing process. 

The problem is, the surrounding temperature changes with the season. A heating pad that works in the summer is not going to to work in the winter.

After many test brews, I’ve finally found the best temperature settings for each season. Just set and forget according to the season and your tastes – you can be confident your brew will turn out great each time! 

Designed To Fit 1-Gallon Brewing Vessels 

One thing I hated about my other heating wraps was taking them off to check the temperature. I’ve made this wrap slightly shorter than the others so you can easily see the temperature of your brewing without having to take off the wrap.

It’s designed to fit conventional 1-gallon brewing vessels. 

Will Keep Your Brew Warm Through The Entire Brewing Cycle

This mat is designed to be left on for extended periods of time. It will have no problem keeping all your brews warm 24 hours a day through the entire brewing cycle. This includes both the first and the second ferments! 

Durable and Waterproof 

I’ve always been worried about using a heat source around kombucha. That’s why I’ve designed this wrap to be splash resistant. It takes the worry out of brewing next to liquids! 

Root Radiance Warm Hydroponic Heating Pad, 20.75" x 10"

Temperature control is the key to brewing consistently great kombucha. Simply place this wrap around the mid-section of your brew jar, fasten with the hook-and-loop strap, and plug into any 120 v grounded outlet. For easy viewing of the included adhesive temperature strip, apply it to the side of your glass jar in the small vertical window between the two ends of the mat. Use this heat wrap year-round as the temperature fluctuates in your home. The mat is made of waterproof material and designed to be left plugged in and on for an indefinite amount of time. Easily adjust the temperature with the variable heat settings and an “off” setting for when additional heat isn’t needed. Dimensions: 19 x 5 in.

Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308 Temperature Controller
1x Manual

RANCO ETC-111000 Digital Cold Temperature Control NEW. Dimensions: 6.52 inch high x 2.7 inch wide x 2.48 inch. SPDT output relay. 12/240 Input Voltage.

This thermostat is simple-stage, electronic temperature controller. The large, lighted LCD screen display is easy to read. The case is designed with fireproof ABS material for human engineering. Temperature sensor is waterproof with high quality, high-accuracy.

Features:
Large LCD screen
Display the sensed temperature, setting temperature, and custom icons on the display indicate working mode, glare free and eye protected.
Support reading with Centigrade or Fahrenheit unit
Easy to use and program
Only 2-step settings for your application, and plug and play design.
With a temperature correction function
Allow user to adjust measuring accuracy base on diferet probe, etc.
Delay starting protection
Protect refrigerating compressor lifetime, avoid compressor to start frequently.
High and low temperature alarms are available
Over-temperature and sensor fault alarm

Specifications:
Power Supply: 100-240VAC 50/60HZ
Max output load: [email protected], [email protected]
Max current: 10A
Temperature Control Range: -40~120℃, -40~248℉
Temperature Control Mode: Heating or Cooling
Temperature Resolution: 0.1℃, 0.1℉
Temperature Accuracy: ±1℃, 1℉
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: Waterproof NTC Sensor
Sensor length:Approx 2m(6 fts)
Input Power Cable Length:150cm (5ft)
Output Power Cable Length: 18cm (7inches)
Controller Dimension: 137*65*28mm

Please note:
The controller will save all settings when power failure. The DIGITEN products are guaranteed to the original owner for one year against defects in workmanship and materials. If there are any questions, please contact us, we will help you.

Packaging include:
1 x DTC101 Temperature Controller
1 x NTC sensor
1 x Manual

Specification:
Maximum Output Load: 120Vac, 60Hz, 15A, 1800W
Temperature Measurement Range: -40~100°C /-40~212°F
Temperature Display Accuracy: 0.1°C /°F (<100°c f)="">
Display Unit: °C /°F (Temperature); %RH (Humidity)
Ambient Temperature: -20~60°C /-4~140°F
Temperature (Storage Environment): 0~60°C / 32~140°F
Humidity (Storage Environment): 20~80%RH (Unfrozen or condensation state)
Temperature Sensor Cable Length: 2m (78.74 in)
Input Power Cable Length: 1.5m (59.05 in)
Unit Dimension: 20.8 cm x 8.5 cm x 3.5 cm (8.19 x 3.35 x 1.38 in)
Package Included:
1x ITC-608T Temperature Controller
2x Temperature Sensor
1x Manual

Model Number:
ITC-100VH — One SSR output + One Relay Alarm Output; AC100-240V;
ITC-100VL — One SSR output + One Relay Alarm Output; AC/DC12-24V;
ITC-100RH — One Relay output + One Relay Alarm Output; AC100-240V;
ITC-100RL — One Relay output + One Relay Alarm Output; AC/DC12-24V;

Specification
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100-240V ±10% 50/60Hz
Operating voltage range： 85～110% Rated voltage
Power Consumption： Approx. 5VA（100～240VAC）
Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS 0.1ºC（＜1000ºC）；1ºC（≥1000ºC）
Period of Sampling： 0.5S
Temperature Compensation： 0-50ºC
Main Output： Relay Contact Output (ITC-100R): AC250V 3A (Resistive load) ON/NC.
Alarm 1 AC250V 3A (Resistive load) ON/NC.
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Weight: Approx. 140g

Environmental Conditions: -10～55ºC（no icy or condensation）, RH 35-85% Humidity
Storage Temperature: -25～65ºC（no icy or condensation）
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals

Pacakge:
1x Inkbird ITC-100RH Controller
1x Mounting bracket
1x Manual

Features:
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Temperature calibration;
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.

Specification
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year

Package Content:
1x ITC 308S Temperature Controller;
1x 6.65ft DC Cord NTC Sensor
1x Manual