Finding your suitable readers for adorama ac socket light stand adapter is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for adorama ac socket light stand adapter including detail information and customer reviews. Let’s find out which is your favorite one.
675 reviews analysed
1. Rextin Medium Edison E26 Socket adapter Base Male Screw In Light Bulb Socket Pigtail For Led Ceiling lights downlight Pack of 10 (10pcs Socket Base)
- Use this E26 adapter to convert downlight ceiling light bulb sockets to LED housings lights
- E26 the US Standard Screw Light Holder with 2 wires (Black positive and white negative) electrical leads ready to connect ,easy to install ,Wires are 32cm /12.6 inches long,perfect for downlight ceiling lights or other led housing lights
- The outlet Socket Adapter: Max 660W-660V
- UL Listed, insulation Flame retardant Heat resistant,Durable
- It is a great converter,connecting to a switch light socket ,allowed you to turn on/off the switch to control the light fixtures connected to the converter,perfect for many recessed lights
2. TARION Camera Flash Bracket Mount Adapter H-Shape 2-Part Swivel Tilt Metal Umbrella Softbox Holder 180° Adjustable 1/4" 3/8" Lamp Light Stand Mount Tripod
- It fits for holding the softbox or umbrella on the light stand and allows for flashing from horizontal / vertical or at the middle and low position.
- 180° adjustment supports any angle of flashing. The flash can be fixed by the screw on the top of the adapter, provide safety.
- The detachable 1/4″-3/8″ double-end nut at the bottom allows for installing your flash on the light stand or tripod freely.
- Dimension: approx.11.5×2.7cm/4.5×1.1″. Diameter of umbrella hole: approx. 1.5cm/0.6″.
- Suitable for 1/4″ or 3/8″ light stand, tripod, softbox, umbrella or flash, etc.
3. Nyce Power LampCharger Light Bulb Socket Adapter, Light Socket USB Charging Station, USB Charger Ports, Tablet and Phone Charger Adapter | 60W Max (2 Pack – Lamp Charger with 2 USB Ports)
- MULTI USB CHARGER FOR LAMPS: Turn any table lamp, desk lamp or bedside lamp into a usb charging station. Our smart light bulb adapter socket converter turns any light socket into a charging port for your phone, tablet or camera. Our light socket adapter installs in seconds and will fit most lamps. No need to hire an electrician!
- DUAL USB CHARGING STATION: Each LampCharger comes with 2 usb ports so you can charge more than one device at a time. Our adapter also features an easy to use on/off switch that controls the light bulb. Our patented design enables you to turn your old lamps into smart lamps with usb ports. No need to buy new expensive lamps!
- 2 AMP RAPID USB CHARGING PORT: We designed our usb ports to provide a stable 5V DC, 2 AMP output so you can safely charge any device. Our USB ports will provide power for your devices even if the power switch on the adapter is in the off position!
- STANDARD LIGHT BULB SOCKET: Our adapter will fit into any lamp socket that fits a standard E26 medium screw bulb base. The light socket on our adapter will also fit a E26 standard medium screw bulb. Our usb power adapter is perfect for any bulb up to 60 watt.
- HOW TO INSTALL: First unplug lamp with the wall outlet to ensure there is no power running to the lamp. Unscrew current light bulb and put aside. Screw the Nyce Power LampCharger into lamp socket until snug. Screw light bulb back into the LampCharger light socket located at the top of the adapter. Ensure the LampCharger power switch is in the off position. Plug lamp back into the wall outlet. USB ports will provide power without the need to have the LampCharger turned on.
Today we are connected more than ever before, with cell phones and tablets – and everything needs power…. but where is that much needed power? Either behind that heavy sofa, bed or across the room. Never close and easy when you need it…. Until now! LampChamp turns any standard lamp in your home into a USB Charging Station! Standard chargers have short cables that make them frustrating to use, but LampChamp puts the port right where you need it so you can charge and talk! Simply remove your existing light bulb, screw in LampChamp, then replace the bulb!
Our LampCharger is perfect for bedside lamps, desk lamps, bedroom lamps, or installing on a bedside table lamp, night lamp, nightstand lamp, bedroom lamp for daytime and overnight charging. LampChamp works at Home, at the Office, or in the Hotel. Get a LampChamp for every lamp in your home and always be within reach of power!
LampCharger by NYCE Power is Backed Up By Our 100% Customer Satisfaction Guarantee – Never Worry, We Are Here To Innovate & Make Your Life Easier.
4. GE Polarized Handy Plug, 2 Pack, Bulb Adapter, Convert Light Socket to Outlet, Easy-to-Install, UL Listed, Black, 54276
- Adapter – Transform a light socket into an outlet when you need one with the GE Polarized Handy Outlet Plug
- Convenient – Use in a space that might not have an outlet where you need in most like in your garage, workshop or shed
- Easy to Install – Turn off the light fixture, remove existing bulb, and simply screw the adapter securely before inserting a 2-prong plug
- Power Pack – Get two of these handy outlets for a bargain price with this 2-pack deal
- Rating – Do not exceed the electrical rating of 125VAC and 660W, and this adapter is UL Listed
Create an outlet where you need one with the GE Polarized Handy Outlet Plug. This adapter 2 pack is perfect for those garages, workshops or sheds with little to no outlets. Turn your light socket into an outlet within seconds! First, turn off the light fixture and unscrew the bulb. Then simply screw in the adapter securely before plugging in a 2-prong plug. This adapter is for indoor use only and should not exceed the electrical rating of 125VAC and 660W. The GE Polarized Handy Outlet Plug is UL Listed.
5. CUZEC 12V/ 24V Extension Cord Plug Socket with Battery Clamp 4.9FT / 1.5m 16 AWG Battery Clip-On and Cigarette Lighter Adapter
- Clips attach directly to the car vehicle battery and use of high-power appliances, thereby protecting the car cigarette lighter. the red is positive and the black is negative.
- Manufactured to power 12 volt and 24 volt appliances.
- Weatherproof: a water resistant cap to protect the female socket from the elements.Durable plastic material ensures durability and longevity.
- External 15Amp fuse protection make sure the safety in case of short circuit and prevent damage to devices from high surge current.And will get extra 15 Ann and 25 Ann fuse as a backup.
- 16 AWG extension cable lengthened up to 4.9ft / 1.5m
Warranty:Will provide with 18-months Warranty from the date of its purchase.
Package Contents: 1 x CUZEC Cigarette Lighter Battery Clamp,1 x 15 Amp fuse,1 x 25 Amp fuse
6. Onite 2pcs E26 to 2 Outlet Light Socket Splitter Adapter, Black
- METERIAL: Construction is no frills, but solid, made of metal and bakelite. The heat resistant is up to 200 degree.
- 660 Watt 110-250 Volt, Two outlet socket adapter Perfect for workshops and garages, split your e26 socket to 2 outlets and 1 sockets
- TECHNICAL SIDE: The typical American 110V incandescent bulb has an Edison E26 base (often labeled “Standard Size” in America) and thus screws into an E26 socket, to use these so you can use normal bulbs.
- UL Listed, insulation Flame retardant Heat resistant, durable, anti-burning and long-lasting. MAX WATTAGE: 300 Watts max wattage, Voltage is 110V, allows you to use high wattage light bulb. The adapter will not convert the voltage. If you have 110V, it will stay 110V. Likewise, 220V will not change. This adapter is for physical dimensions only.
- EASY TO INSTALL: The bulbs fit into the adapters very easily and each one of ours fits securely. Doing this enabled us to replace the old CFL’s we had with something that is non-toxic and uses less electricity. SATISFACTION GUARANTEED: 2-Pack. 100% satisfaction guaranteed. 60 days changing or refunding without reasons. Onite always stand back for its products, any issue of the product please don’t hesitate to contact us.
E26 US Standard Screw Light Holder with Two Outlet Socket Adapter, Black
Onite 2 OUTLET SOCKET KEYLESS ADAPTER 660 watts 110-250 volt AC 2-pole 2-wire Lampholder and 2 outlets Outlet continuously live UL and CSA approved Brown Replaces Ace no. E213715
7. 2 Outlet Light Socket Adapter,E26 Bulb Socket to Outlet Splitter,Converts Medium Screw Socket into a Socket with Two outlets,Polarized Outlet,With Pull Chain Switch. UL Listed, White (2-Pack)
- SAFE MATERIAL -The UL Listed adapter is composed of Eco-friendly Urea Resin, copper connector.The outlet receptacle carries electric rating up to 660W 125V. And the extended socket carries a E26 Screw bulb light up to 250W
- HANDY OUTLET ADAPTER -Easy way to add an outlet where you need it.Play and plug, no need to pay an electrician when you can make power available yourself
- WITH PULL CHAIN SWITCH -The pull chain add a switch of the place where there isn’t a light switch. Even there is a power switch, the pull string could be conveniently used to control the separate light bulb
- WIDE APPLICATION – Great way to add outlets for Christmas LED string lights
- connect shop lights to an existing bulb socket
- plug in security camera into front door light socket/ porch light socket
- install strip lights/T5 LED Light with an AC plug
- Perfet for adding a temporary outlet at a light socket in garage,basement,workshop,utility room etc
- MONEY BACK GURANTEE – 3 Months money back guarantee and 1 Year quality assurance under normal use. Feel free to buy from Emnooti with confidence
The crafted designed adapter is to transform Medium Screw Socket into a Socket with Two outlets.
It fits for regular base light bulbs E26 Sockets. And the outlets are polarized, one slot is longer than another.
The outlet adaptor is not water resistant. If you want to use it in outside to give extra outlets for cord Christmas string light or device with AC plug ,keep the outlet adapter covered/dry (like on a covered front porch in porch light socket, Covered floodlight socket ,ect).
This adapter only works with two pronged devices（no ground.NOT GOOD FOR 3 PRONG devices.)
-The pull chain switch controls the screw-in light bulb.The two outlets are “always on”.
-For your safety use, do not exceed the electrical ratings for the outlets at 125VAC and 660W and switch/lamp holder at 125VAC, 250W.
Max Wattage / Voltage for outlets: 660W / 125V ( Recommended the amperage of all your combined devices is less than 5 amps )
Max Wattage / Voltage for socket extender: 250W / 125V
Length of the pull chain: 5 inch
-2 X White Outlet Socket Adapter
8. Neewer Multi Functional Heavy Duty 2.5-inch Grip Head Swivel Head Holder Mounting Adapter for Light Stand, Extension Boom Arm and Other Photographic Equipment with 1/2,1/4,3/8,5/8-inch Mount (Black)
- Connects an extension arm to a light stand
- Holds the boom arm in place
- Enables to adjust the height and angle and gives you flexibility to position the equipment
- Accepts any accessory with a 1/2, 1/4, 3/8, 5/8-inch mounting stud or tubing
- Locks tight with less effort
- Easy to set up and use
- Note: Grip head only
- Light stand and boom arm are not included
Note: Grip head only; Light stand and boom arm are not included
Connects an extension arm to a light stand; Holds the boom arm in place
Enables to adjust the height and angle and gives you flexibility to position the equipment
Accepts any accessory with a 1/2, 1/4, 3/8, 5/8-inch mounting stud or tubing
Locks tight with less effort
1 x 2.5-inch Grip Head
9. Manfrotto 026 Swivel Lite-Tite Umbrella Adapter,Black
Easily attaches an umbrella to your light stand. Tilting feature adds adjustability to light and umbrella.
From the Manufacturer
|No place to mount an umbrella on your light stand?
That is no problem with this Manfrotto Swivel Umbrella Adapter (Lite-Tite). This adapter attaches between the light head and stand, giving a receptacle for mounting an umbrella.
The adapter also tilts allowing multiple positioning of the light head and umbrella.
Includes the Swivel Umbrella Adapter, a 118 adapter (double male 5/8″ stud) and a 119 adapter (double female 5/8″ stud).
Recommended Accessory: The 143S or 143S-1 will allow you to attach a standard cold shoe mount to the Swivel Umbrella Adapter so that you can easily attach your shoe mount flash.
||Attaches by||17.5mm female|
||0.38 kg • 0.84 lb
||2.5 kg • 5.5 lb
10. Adorama AC Socket with Light Stand Adapter & Umbrella Holder 2 PK
Adorama AC Socket with Light Stand Adapter & Umbrella Holder 2 PK
By our suggestions above, we hope that you can found Adorama Ac Socket Light Stand Adapter for you.Please don’t forget to share your experience by comment in this post. Thank you!