Top 9 Heating Bulb Temperature Controller

0
746 reviews analysed

1. BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, 8.3A 1000W ETL Listed

BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, 8.3A 1000W ETL Listed

Feature

2. Simple Deluxe 150W Infrared Ceramic Reptile Heat Lamp Bulb Combo for Amphibian Pet

Simple Deluxe 150W Infrared Ceramic Reptile Heat Lamp Bulb Combo for Amphibian Pet

Feature

Description

Size:Heat Lamp+Clamp Light+Thermostat

Infrared Ceramic Reptile Heat Bulb: Specifications: Socket: E26Volt: AC 110-120VWatts: 150WMaterial: Ceramic, Diameter of heating surface: 85 mm Note: 1. Lamp surface temperature is too high, do not directly touch during it works. 2. Before remove it from fixture, please allow at least 1 hour for cool to avoid scald. 3. Accidents may happen due to improper operation so please use it in a right way and avoid using in damp environment. 4. Please adjust the distance between the lamp and the pets, at least 35cm. 5. Please away from combustible or explosive materials. ; Digital Thermostat Controller: Specifications: Temperature control range: 40-108°FTemperature display range: 32-140°FRated Voltage: AC 120V 60HzMax Loading: 8A 1000WEasy plug-in operation with LED illuminated indicator lights & three-prong ground plug The cord of the temperature probe and grounded three-prong plug is 6 feet ETL certification is proof that a product complies with widely-accepted safety standards Digital thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. Abnormal Warning: 1. If thermostat shows “E1”, it means that the actual temperature is lower than 0 degree Celsius or 32. 0 degrees Fahrenheit. 2. If thermostat shows “E2”, it means that the actual temperature is higher than 60. 0 degrees Celsius or 108. 0 degrees Fahrenheit. 3. If thermostat shows “E3”, it means that the temperature sensor is not working properly. Please re-install the sensor. Clamp Light: : 120VWatt: Accepts up to 150W bulb (E26)Reflector Diameter: 8. 5 inch Cord: 6 Feet 18/2 SPT-2 Cord UL Listed Clamp light can also be used as a table lamp in your room, garages or art studios, a work light in photography and workshops, amphibians and reptiles pets terrarium heat lamp, and even a growth light for indoor plants. Warning: The power cord on this product contains chemicals, including lead known to the State of California to cause cancer. Wash hands after use.

3. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A

bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A

Feature

4. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control

Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control

Feature

Description

Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308 Temperature Controller
1x Manual

5. Inkbird Dual Stage Temperature Controller + NTC Sensor, AC 100V – AC 240V. (ITC-308S + 1.97" NTC Probe)

Inkbird Dual Stage Temperature Controller + NTC Sensor, AC 100V - AC 240V. (ITC-308S + 1.97" NTC Probe)

Feature

Description

Size:ITC-308S+NTC Probe

Features:
– Plug and play design, easy to use.
– Support reading with Centigrade or Fahrenheit unit.
– Temperature calibration.
– Compressor delay protection for refrigeration control.
– High and low temperature alarms are available.
– Over-temperature and sensor fault alarm.
– Heating/Cooling differential function could be set separately for cooling and heating to protect temperature controller from violent change.

Specification:
Temperature Control Range : -50~99°C / -58~210 °F
Temperature Resolution: 0.1°C / 0.1°F
Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Input Power: 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308S Temperature Controller
1x 1.97″ Female to Male NTC Sensor
1x Manual

6. WILLHI WH-1803C PID High Accuracy Temperature Controller Heating 110V 5A Accuracy 0.1 ℃ or 0.1 °F Digital Outlet Thermostat Waterproof Probe for Incubator Wine Brewing Fermentation Temp Control

WILLHI WH-1803C PID High Accuracy Temperature Controller Heating 110V 5A Accuracy 0.1 ℃ or 0.1 °F Digital Outlet Thermostat Waterproof Probe for Incubator Wine Brewing Fermentation Temp Control

Feature

7. Inkbird ITC-608T Temperature Controller with Dual Temperature Sensor AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed

Inkbird ITC-608T Temperature Controller with Dual Temperature Sensor AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed

Feature

Description

Size:1800W ITC-608T Temp controller+temp probe*2

Specification:
Maximum Output Load: 120Vac, 60Hz, 15A, 1800W
Temperature Measurement Range: -40~100°C /-40~212°F
Temperature Display Accuracy: 0.1°C /°F (<100°c f)="">
Display Unit: °C /°F (Temperature); %RH (Humidity)
Ambient Temperature: -20~60°C /-4~140°F
Temperature (Storage Environment): 0~60°C / 32~140°F
Humidity (Storage Environment): 20~80%RH (Unfrozen or condensation state)
Temperature Sensor Cable Length: 2m (78.74 in)
Input Power Cable Length: 1.5m (59.05 in)
Unit Dimension: 20.8 cm x 8.5 cm x 3.5 cm (8.19 x 3.35 x 1.38 in)
Package Included:
1x ITC-608T Temperature Controller
2x Temperature Sensor
1x Manual

8. Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit & Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)

Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit & Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)

Feature

Description

Size:110 Volt

Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes

Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50~210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF(-50 oF -160 oF)/ ±1 oC(-50 oC -70 oC) Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)

Package Content:
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
1x Muanal

9. Inkbird ITC-1000F 2 Stage Temperature Controller Cooling and Heating Modes Celsius and Fahrenheit

Inkbird ITC-1000F 2 Stage Temperature Controller Cooling and Heating Modes Celsius and Fahrenheit

Feature

Conclusion

By our suggestions above, we hope that you can found Heating Bulb Temperature Controller for you.Please don’t forget to share your experience by comment in this post. Thank you!

We will be happy to hear your thoughts

Leave a reply

Home Previews
Logo
Enable registration in settings - general