Top 10 Pc Cooling Fluid Clear

0

Finding your suitable readers for pc cooling fluid clear is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for pc cooling fluid clear including detail information and customer reviews. Let’s find out which is your favorite one.

952 reviews analysed

1. PrimoFlex Advanced LRT 3/8in. ID x 1/2in. OD Tubing Bundle (10ft Pack) – Crystal Clear (10ft Pack)

PrimoFlex Advanced LRT 3/8in. ID x 1/2in. OD Tubing Bundle (10ft Pack) - Crystal Clear (10ft Pack)

Feature

Description

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

2. EKWB EK-CryoFuel Premix Coolant, 1000mL, Blood Red

EKWB EK-CryoFuel Premix Coolant, 1000mL, Blood Red

Feature

Description

Color:Blood Red

The EK-CryoFuel is a new revolutionary coolant for PC liquid cooling systems. EK-CryoFuel is the most chemically stable coolant that provides enthusiasts and gamers with the best possible level of performance and thermal efficiency with emphasis on color stability. EK-CryoFuel coolant is a pure, non-toxic coolant based on the patent pending chemical formula, which prevents the creation of any sediments in the liquid cooling loop. Liquid cooling users can rest assured that the EK-CryoFuel coolant, with its very low viscosity, will not clog or damage their water blocks and other parts of the loop when used with EK-DuraClear or EK-ZMT tubing.

3. PrimoFlex Advanced LRT 3/8in. ID x 5/8in. OD Tubing Bundle (10ft Pack) – Crystal Clear

PrimoFlex Advanced LRT 3/8in. ID x 5/8in. OD Tubing Bundle (10ft Pack) - Crystal Clear

Feature

Description

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

4. PRIMOCHILL Intensifier Transparent Fluid Dye – Clear/UV Blue

PRIMOCHILL Intensifier Transparent Fluid Dye - Clear/UV Blue

Feature

Description

PrimoChill Intensifier coolant dyes have been carefully reformulated into smaller batches to ensure the highest quality and consistency from batch to batch. Each batch is “Intensely” inspected and tested for consistent color, signs of contamination that may have occurred during the manufacturing process, effects of temperature extremes, and any sign of degradation. This vigorous testing is performed in a real world environment with the latest water cooling hardware. Over the last decade, PrimoChill has strived to provide the water-cooing community quality products that inspire our customers. Intensifier Coolant Dyes are the next generation of cool. Get Creative!

5. EKWB EK-CryoFuel Solid Premix Coolant, 1000mL, Neon Green

EKWB EK-CryoFuel Solid Premix Coolant, 1000mL, Neon Green

Feature

Description

Color:Neon Green

EK-CryoFuel Solid non-transparent coolants are all based on a new patent-pending formula with vivid, long-lasting color stability. The coolant contains everything a high-end liquid cooling system requires for efficient thermal performance and providing the necessary protection for your water blocks. It carries the essential synergistic corrosion inhibitors and biological inhibitors – thus promoting long and safe operational life for your liquid cooling products and high thermal efficiency.

With countless hours of in-house and third-party real-life scenario testing, EK-CryoFuel Solid is the most chemically stable coolant that provides enthusiasts with the best possible level of performance and thermal efficiency with emphasis on color stability. The key feature of the new coolant formula is that it is not sedimenting after long hours of inactivity of the cooling loop. Designed specifically for computer liquid cooling systems, the EK-CryoFuel offers a 1-year shelf life from date of bottling.

  • contains corrosion and scale inhibitors
  • contains biological growth inhibitors
  • good heat transfer characteristics
  • color pigments don’t leave residue
  • high specific heat
  • chemically stable
  • low viscosity
  • non-toxic

EK-CryoFuel contains synergistic corrosion inhibitors to protect metals commonly found in computer liquid cooling systems. It has been tested in accordance with BS5117 (ASTM D1384) and found to meet corrosion standards for copper, brass, aluminum and stainless steel. This coolant also contains scale and biological inhibitors to help prevent fouling – thus promoting long operational life and high thermal efficiency, providing best value/performance ratio.

Does not contain ethylene glycol or a bittering agent.

Model: 3831109880364

6. PrimoChill System Reboot – Cooling Loop Treatment

PrimoChill System Reboot - Cooling Loop Treatment

Feature

Description

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components.

Specifications

  • Bottle Size: 15ml
  • Dosage: Mix with 1 Gallon of DI or distilled water
  • Shelf Life: 2 Years, Unopened
  • Compatibility: ReBoot is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics

    Included Parts: 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)

    Instructions
    1.Double-check connections to ensure loop is “closed”. No Leaks!
    2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, shake for 30 seconds
    3.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
    4.Start pump and begin circulating the treated solution.
    5.Run solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
    6.Drain System. Inspect drained solution for debris or foreign particles. Repeat flush if needed.
    7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
    8.Drain system.**.
    9.Fill loop with your choice of coolant and begin water-cooling.
    ** Reboot needs to be flushed from the system until no foam is seen and water runs clear

    Warnings

  • Do not mix with any pre-mixed coolants.
  • PrimoChill is not responsible for any hardware damage. Use at your own risk.
  • 7. Zopsc DIY Compputer Water Cooling Kit with 240mm Heat Sink, LED Fan, CPU/GPU Block, Water Pump Reservoir,Transparent Hose, etc

    Zopsc DIY Compputer Water Cooling Kit with 240mm Heat Sink, LED Fan, CPU/GPU Block, Water Pump Reservoir,Transparent Hose, etc

    Feature

    Description

    Specifications:
    1. 240mm black heat sink (with screw pack):
    Appearance size: 27.5 * 11.8 * 3.2cm
    Straight mouth height: 2cm
    Diameter of straight tube: about 9.5 mm
    Number of waterways: 18

    2. Universal CPU block (with 4 pcs screws):
    Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
    Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
    Screw size: G1 / 4
    Outside diameter: 12.9MM
    Bottom contact size: 5 * 5cm, thickness 3mm
    Material: Bottom: copper; Cover: transparent plexiglass

    3. Universal GPU block
    Interface: G1 / 4 universal thread, diameter of 12.9mm
    Material: Bottom: copper; Cover: POM high temperature materials
    Waterway: 0.8MM parallel waterway
    Compatibility: Matches a fan with a distance of 53 mm to 61 mm
    Supported tube: 9.5mm ID / 12.7mm OD PU tube, or 10mmID / 16mmOD solid tube, or 8mmID / 12mmOD silicon tube (ID is the inner diameter, OD is the outer diameter)

    4. Cylindrical Water Reservoir (including plastic bracket * 2, metal bracket * 2, screw pack * 1):
    Water reservoir height: about 160mm
    Water reservoir diameter: 5cm
    Water reservoir interface: G1 / 4 universal thread
    Interface diameter: 12.9mm

    Package List:
    1 x 240mm Heat Sink within Screw Pack
    2 x LED Fan
    1 x Universal CPU Block within 4 Screws
    1 x Universal GPU Block within 4 Screws
    1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
    1 x Transparent Hose
    1 x Water Pump with Shock Pad
    1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs

    8. PC Water Pump Tank,Computer Liquid Water Cooling Radiator Acrylic Cylinder Water Reservoir Tank,Full Open Design Noise Reduction Water Cooling Tank

    PC Water Pump Tank,Computer Liquid Water Cooling Radiator Acrylic Cylinder Water Reservoir Tank,Full Open Design Noise Reduction Water Cooling Tank

    Feature

    Description

    Features:

    A kit of computer water cooling reservoir, consists of a main water reservoir, plastic brackets, L-type metal stand and screws kit. Effectively for heat reducing, maintain the proper temperature to keep the computer running well. Made of high-quality POM and PMMA material, shock, acid and alkali resistance, durable to use. Full open design, free to screw up and down. Noise reduction, work quietly and do not disturb you while you are working or studying on the computer.

    Specifications:

    Color: Transparent

    Shape: Cylinder

    Screw Thread: G1/4

    Material: POM + PMMA

    Interface Diameter: Approx. 12.9mm

    Package Size: Approx. 20 * 14 * 7cm

    Weight: 200g

     

    Package List:

    1 * Cylinder Water Reservoir

    2 * Plastic Brackets

    2 * L-Type Metal Stands

    1 * Screws Kit

    9. PrimoFlex Advanced LRT 1/2in. ID x 3/4in. OD Tubing Bundle (10ft Pack) – Brilliant UV Blue

    PrimoFlex Advanced LRT 1/2in. ID x 3/4in. OD Tubing Bundle (10ft Pack) - Brilliant UV Blue

    Feature

    Description

    PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.

    LOW RADIUS TECHNOLOGY
    PrimoChill’s proprietary blend of notably low durometer PVC and more rigid polymer resin provides PrimoFlex Advanced LRT with an unbeatable bend ratio and durability. It resisted both twisting and collapse in test results. This allows for tighter bends eliminating kinking that can cause cooling failures and reduction in system performance.

    CLARITY IN SIGHT AND MIND
    Smooth inner walls improve closed loop sanitation. Advanced LRT smooth surface inhibits particulate gathering or entrapment onto the tubing wall. 

    Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep to flush your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. 

    Warnings

    With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Although Advanced LRT is designed to work with a large variety of cooling components the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.

    10. PrimoChill Rad Clean – Radiator Cleaning Treatment KIT

    PrimoChill Rad Clean - Radiator Cleaning Treatment KIT

    Feature

    Description

    The PrimoChill Rad Clean – Radiator Cleaning Treatment is a solution for cleaning radiators outside of a loop. By using this cleaner you can “”scrub”” the inside of your rad without fear of damaging other components, seals or acrylic! This solution is easy to mix, easy to use, and gets you ready to go!
    Specifications

  • Bottle Size: 2oz
  • Included:2oz Rad Clean, 2 plastic fittings w/ orings, 1 threaded funnel
  • Dosage: Mix 1/2 bottle with 32oz of DI or distilled water
  • Compatibility
    Rad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible!
    Instructions
    For this pre-treatment to work correctly follow the instructions below. 
    Step 1: Dilute one half bottle of RadClean into 32oz of distilled/Ro/Di water.
    Step 2: Fill radiator up with Radclean mixture
    Step 3:Close both ports with plastic fillports. Ensure they’re plastic. Shake radiator.
    Step 4:Let your radiator sit for one hour.
    Step 5:Drain radiator and flush radiator extensively with distilled/ro/di water
    Step 6:Drain radiator and let dry completely.
    Warnings
    Important to use plastic fittings when cleaning radiators while using Rad Clean! PrimoChill is not responsible for any hardware damage. Use at your own risk.

    Conclusion

    By our suggestions above, we hope that you can found Pc Cooling Fluid Clear for you.Please don’t forget to share your experience by comment in this post. Thank you!

    We will be happy to hear your thoughts

    Leave a reply

    Home Previews
    Logo
    Enable registration in settings - general